3D Printer Gear Rail Lubricant Grease for Bambu Lab X1C P1S P1P A1 Mini Creality K1 Max Maintenance Oil Accessories
5pcs
Dhs. 36.99
Sale price
Dhs. 36.99
Regular price
Skip to product information
3D Printer Gear Rail Lubricant Grease for Bambu Lab X1C P1S P1P A1 Mini Creality K1 Max Maintenance Oil Accessories
Dhs. 36.99
Sale price
Dhs. 36.99
Regular price
Special lubricating oil/grease for 3D printers | Low noise, low volatility, high cleanliness
Suitable for key components such as linear guides, optical axes, ball bearings, screws/nuts, extruder gears, resin machine Z-axis guide columns and sliders
Smooth and Silent: A stable oil film is formed between the guide rail and the screw, reducing friction and impact, resulting in smoother printing operation and lower noise
Low volatility and low odor: indoor friendly, and can be printed for a long time without being pungent
Wear resistant and durable: Contains PTFE/anti-wear and anti-oxidation functional additives to reduce wear and corrosion
Not easy to vacuum: formula optimized for 3D printing dust environment, reducing dust accumulation and secondary pollution
Wide material compatibility: friendly to common materials such as PLA/ABS/PETG/PA/PC/PMMA and NBR/EPDM/FKM rubber
Easy to use and easy to maintain: precise application of syringe/dropper, cleaning - oiling - driving - wiping off remaining oil
Instructions for use
Power off the refrigeration unit → Cleaning: Wipe off old grease, and if necessary, use IPA (isopropanol)/neutral cleaning agent to remove dirt and dry
Application:
Guide rail/optical axis: 1-2 drops of guide rail oil per 100 mm point on each side, evenly push and pull the slider several times
Screw/nut: a thin layer of screw grease, rotate the screw to evenly distribute it
Z-axis guide post/slider: Apply a small amount of silicone oil along the guide post, lift and drive evenly
Wipe off residual oil: a thin film visible on the surface is sufficient to avoid oil splashing and dust collection
Moisturizing cycle: every 50-200 hours or 1-3 months (depending on environmental dust/speed)
Smooth and Silent: A stable oil film is formed between the guide rail and the screw, reducing friction and impact, resulting in smoother printing operation and lower noise
Low volatility and low odor: indoor friendly, and can be printed for a long time without being pungent
Wear resistant and durable: Contains PTFE/anti-wear and anti-oxidation functional additives to reduce wear and corrosion
Not easy to vacuum: formula optimized for 3D printing dust environment, reducing dust accumulation and secondary pollution
Wide material compatibility: friendly to common materials such as PLA/ABS/PETG/PA/PC/PMMA and NBR/EPDM/FKM rubber
Easy to use and easy to maintain: precise application of syringe/dropper, cleaning - oiling - driving - wiping off remaining oil
Instructions for use
Power off the refrigeration unit → Cleaning: Wipe off old grease, and if necessary, use IPA (isopropanol)/neutral cleaning agent to remove dirt and dry
Application:
Guide rail/optical axis: 1-2 drops of guide rail oil per 100 mm point on each side, evenly push and pull the slider several times
Screw/nut: a thin layer of screw grease, rotate the screw to evenly distribute it
Z-axis guide post/slider: Apply a small amount of silicone oil along the guide post, lift and drive evenly
Wipe off residual oil: a thin film visible on the surface is sufficient to avoid oil splashing and dust collection
Moisturizing cycle: every 50-200 hours or 1-3 months (depending on environmental dust/speed)